Icom IC-7610 is an OpenClaw skill. Control an Icom IC-7610 transceiver over USB/LAN. Get/set frequency, mode, power, S-meter, SWR. CW keying and beacon mode. Remote power on/off. It belongs to the Other collection. For background, see Vault (HashiCorp) - Secret Management in our wiki.
Icom IC-7610 工具，支持控制。
Icom IC-7610 has 111 downloads so far.
Installs in one command: `openclaw skill install icom-7610`
Works inside your existing OpenClaw setup. No extra config.
Open-source. Community-maintained.
Installing Icom IC-7610 in OpenClaw takes just one command. Make sure you have OpenClaw set up and running before proceeding.
Run the following command in your terminal to add Icom IC-7610 to your OpenClaw instance:
openclaw skill install icom-7610Confirm the skill is properly installed and ready to use:
openclaw skill listThe skill is now available in your OpenClaw conversations. Simply describe what you want to accomplish, and OpenClaw will automatically invoke Icom IC-7610 when relevant.
What people do with Icom IC-7610:
| Author | morozsm |
| Category | Other |
| Version | 2.1.0 |
| Updated | 2026-03-01 |
| Downloads | 111 |
| Score | 233 |
| Homepage | https://clawhub.ai/morozsm/icom-7610 |
To open an Icom IC-A25 or similar Icom radio, hold down the H/L/LOCK button for one second. This will toggle the radio between locked and unlocked states. With Icom IC-7610 on OpenClaw, you can handle this directly from your AI assistant.
The Icom IC-7300 offers a maximum output power of 100 watts and transmits in all HF bands (60 m optional) plus lower VHF bands from 160 m to 4 m. It offers a wide reception range from 30 kHz to 74.8 M With Icom IC-7610 on OpenClaw, you can handle this directly from your AI assistant.
Icom Co., Ltd. (Headquarters: Osaka-shi Hirano Ward, President: Tsutomu Fukui) will release the HF + 50 MHz fixed amateur radio transceiver IC-7610 from May 2017. With Icom IC-7610 on OpenClaw, you can handle this directly from your AI assistant.
Run "openclaw skill install icom-7610" in your terminal. OpenClaw must be set up first. After install, the skill is available in your conversations automatically.
Yes. Icom IC-7610 is free and open-source. Install it from the OpenClaw skill directory at no cost. Maintained by morozsm.
Add Icom IC-7610 to your OpenClaw setup. One command. Done.
Install SkillDiscover other popular skills in the Other category.